SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 303 of 671
12-102. TROOP/CARGO WINTERIZATION HEATER AIR INTAKE ASSEMBLY
REPLACEMENT
This task covers:
a. Removal
b. Installation
Materials/Parts
Three locknuts (Appendix G, Item 133.11)
Four locknuts (Appendix G, Item 133.10)
Manual References
TM 9-2320-387-24P
SMI 9-2320-387-14&P-1
Change 4
12-155
INITIAL SETUP:
Applicable Models
M1152
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
1.
Remove two clamps (9) and flex duct (11) from diverter assembly (10) and adapter (7).
2.
Remove three locknuts (5), capscrews (3), and hood (2), from top cover assembly (1) and plate (4).
Discard locknuts (5).
3.
Remove four locknuts (8), screws (12), adapter (7), and screen (6) from plate (4). Discard locknuts (8).
1.
Install screen (6) and adapter (7) on plate (4) with four screws (12) and locknuts (8).
2.
Install hood (2) on top cover assembly (1) and plate (4) with three capscrews (3) and locknuts (5).
3.
Install flex duct (11) on adapter (7) and diverter assembly (10) with two clamps (9).
b. Installation
a. Removal
Back to Top
