TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 391 of 460

II

106700-7

Rev. -

Page 33

e.

Attach the Top Windshield Brackets (P/N 106734-2 or -6-103) marked

“This Side

Out”

to the

opposite

side of the Windshield Frame (P/N 106721-1-103) on the upper

studs using twelve (12) 0.250-in. self-locking nuts and washers (see Figure 17).

Verify that both brackets are parallel with the top edge of the windshield frame.

f.

Apply sealant (P/N 104302-1) to the windshield frame around the windshield stud

plate mounting holes per Figure 17.

g.

Attach the Windshield Stud Plate, (P/N 106733-1-103) to the Windshield Frame using

five (5) 0.250-in. self-locking screws and washers, as shown in Figure 18.

Torque the

nuts to 6 ft-lb.