TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 397 of 460

II

106700-7

Rev. -

Page 39

5.1.2

Install the Front Armor Protection Kit, P/N 106705-3

a.

Install the LH and RH Seven-Wire Wiring Pigtail (P/N 111438-4) to extend the

headlight and marker light wires (plug in).

b.

Insert the Seven-Wire Wiring Pigtail and the attached Grommet into the Headlight

Cover (P/N 113379-1) on the LH and RH sides.

c.

Caulk the inside perimeter of the Headlight Covers with sealant (P/N 104302-1 of

Kit P/N 106701-4).

d.

Attach the Headlight Covers (LH and RH using three screws (No. 14 - 0.500 LG) for

each cover (See Figure 23).

Start the screws from inside the cab.

The cover’s holes

are threaded for the No. 14 screw.