TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 392 of 460

II

106700-7

Rev. -

h.

Pre-fit the Windshield Frame Assembly on the vehicle, as shown in Figure 18.

Adjust

the Side and Bottom Brackets as needed to line up the studs on the Windshield

Frame.

Use caution to avoid damage to the studs.

DO NOT hammer the studs into

position on the brackets.

Remove the Windshield Frame Assembly and tighten the

set screws in the Side and Bottom Windshield Brackets.