5-67
TB 9-2320-280-35-14
24-24.
Position grommet (52) in access hole (49).
24-25.
Route cables (12), (15), and (29) under fixed rear door (48) and along rear perimeter of left rear seat
back support (50). Secure with three loop clamps (26), screws (55), lockwashers (53), and
plain-assembled nuts (54).
24-26.
Route cables (12), (15), and (29) through access hole (49) and grommet (52).
24-27.
Secure cables (12), (15), and (29) to left rear wheelhouse (46) with four clamps (26) and
self-tapping screws (25).
24-28.
Take slack out of cables and store under EPLRS mount assembly (45).
24-29.
Tighten screws and nuts on clamps.
24-30.
Secure right-side tunnel insulation. (Refer to TM 9-2320-280-20.)
Figure 5-88.
25. SELF-TAPPING SCREW – 9421073 – QTY. 4
26. LOOP CLAMP – MS21333-77 – QTY. 7
52. GROMMET – MS35489-24 – QTY. 1
53. LOCKWASHER – MS35338-43 – QTY. 3
54. NUT, PLAIN-ASSEMBLED – 9422771 – QTY. 3
55. SCREW – MS35206-265 – QTY. 3
12 15 29
46
45
~
49
52
48
~
50
26
53
54
26
26
53
54
53
54
~
55
25
25
26
26