TB-9-2320-302-13-P-1
CREW PROTECTION KIT PART 1 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS
NOVEMBER 2006
TB-9-2320-302-13-P-1 - Page 61 of 380
TB 9-2320-302-13&P-1
0011 00-1
GENERAL MAINTENANCE INSTRUCTIONS
0011 00
THIS WORK PACKAGE COVERS
Scope
Work Safety
General Information
Cleaning Instructions
Inspection Instructions
Painting Instructions
Standard Tool Requirements
Use of Thread Adhesive
Use of Sealant
Applying Torque
Tagging Instructions
INITIAL SETUP
Maintenance Level
Unit
Tools and Special Tools
Tool Kit, General Mechanic’s (Item 8, WP 0033 00)
Shop Equipment, Common No. 1 (Item 6, WP 0033
00)
Materials/Parts
Adhesive, Thread (Item 1, WP 0034 00)
Cleaning Compound, Solvent (Item 2, WP 0034 00)
Cloth, Abrasive (Item 3, WP 0034 00)
Detergent (Item 4, WP 0034 00)
Materials/Parts - Continued
Oil, Lubricating (Item 5, WP 0034 00)
Rag, Wiping (Item 6, WP 0034 00)
Tag, Marker (Item 10, WP 0034 00)
References
WP 0031 00
WP 0035 00
TB 43-0209
TB 43-0242
TM 9-247
SCOPE
1.
These general maintenance instructions contain general shop practices and specific methods you must be familiar with
to properly install and maintain the Crew Protection Kit.
2.
Read and understand these practices and methods before starting maintenance tasks on the Crew Protection Kit.
WORK SAFETY
0011 00
WARNING
•
Use caution when handling window glass. Glass can break unexpectedly during removal/installation
procedure. Wear face shield, apron, and gloves. Failure to follow this warning may cause injury to per-
sonnel.
•
Edges of metal armor panels may be sharp. Wear protective gloves when handling armor panels. Failure
to follow this warning may cause injury to personnel.
1.
Before starting a task, think about the risks and hazards to your safety as well as others. Wear protective gear such as
safety goggles or lenses, face shield, safety shoes, and gloves. Protect yourself against injury.
2.
Observe all WARNINGs and CAUTIONs.
Back to Top
