TB-9-2320-302-13-P-1
CREW PROTECTION KIT PART 1 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS
NOVEMBER 2006
TB-9-2320-302-13-P-1 - Page 55 of 380
TB 9-2320-302-13&P-1
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
0009 00-13/(0009 00-14 Blank)
END OF WORK PACKAGE
10
Weekly
Wheels and
Wheel Rims
Inspect wheel lug nuts and wheel rim
bolts/nuts for looseness (e.g., polished
surface, rust, or minor cracks around
bolt and wheel mating surfaces). Notify
your supervisor of any looseness found.
Two or more studs or nuts are missing
from the same wheel.
11
Weekly
Crew Protec-
tion Kit
Mounting
Hardware
Check all armor kit mounting hardware
for loose or missing hardware. Notify
your supervisor of any loose or missing
mounting hardware found.
Loose or missing mounting hardware is
noted.
12
Weekly
Escape
Hatch
a. From inside the cab, check that
escape hatch door will open and then
securely latch closed. Ensure there is
no damage to pins and mounting
hardware.
Escape hatch door will not open or latch
closed securely.
b. Inspect for damage to escape hatch
seal. Notify your supervisor of any
damage found.
13
Weekly
Door
Assemblies
Check both door assembly seals, hard-
ware and door stops for damaged or
loose components. Notify your supervi-
sor of any damage found.
Door assembly is damaged, loose or
missing or mounting bolts are loose or
missing.
Item
No.
Interval
Location
Procedure
Not Fully Mission
Capable If:
Item To
Check/
Service
Back to Top
