TB-9-2320-302-13-P-1
CREW PROTECTION KIT PART 1 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS
NOVEMBER 2006
TB-9-2320-302-13-P-1 - Page 81 of 380
TB 9-2320-302-13&P-1
DOOR BALLISTIC GLASS AND FRAME ASSEMBLY REPLACEMENT - CONTINUED
0015 00
0015 00-3/(0015 00-4 Blank)
CLEANING AND INSPECTION
Clean and inspect all parts IAW
General Maintenance Instructions
(WP 0011 00).
INSTALLATION
WARNING
•
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Failure to follow this warning may cause injury or death to personnel.
•
Use caution when handling window glass. Glass can break unexpectedly during removal/installation
procedure. Wear face shield, apron, and gloves. Failure to follow this warning may cause injury to per-
sonnel.
NOTE
Door ballistic glass and frame assembly weighs 151.8 lb (69 kg).
1.
With assistance, carefully install ballistic glass (16) from outside of door (1).
2.
With assistance, install the two most forward facing washers (8), bolts (7), washers (15), and nuts (14) while maintain-
ing support for ballistic glass (16).
3.
With assistance, install upper mirror support (6) with upper two washers (8), bolts (7), washers (15), and nuts (14) while
maintaining support for ballistic glass (16).
4.
With assistance, install lower mirror support (2) with lower two remaining washers (8), bolts (7), ballistic window stop
(13), washers (15), and nuts (14) while maintaining support for ballistic glass (16).
WARNING
Use caution when handling window glass. Glass can break unexpectedly during removal/installation proce-
dure. Wear face shield, apron, and gloves. Failure to follow this warning may cause injury to personnel.
5.
With assistance, carefully install internal ballistic glass door frame (11) with ballistic glass (12) to door (1).
6.
With assistance, install six bolts (3), washers (4), washers (10), and nuts (9) while maintaining support for internal bal-
listic glass door frame (11) with ballistic glass (12).
7.
Install outside mirror to door assembly. For the M915A3P1, M916A3P1, and M917A2P1, refer to TM 9-2320-302-20-2.
For the M915A4P1, refer to TM 9-2320-303-24-1. For the M915A2P1, M916A1P1, M916A2P1, and M917A1P1, refer
to TM 9-2320-363-20-2.
END OF WORK PACKAGE
Back to Top
