TB-9-2320-302-13-P-1
CREW PROTECTION KIT PART 1 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS
NOVEMBER 2006
TB-9-2320-302-13-P-1 - Page 80 of 380
TB 9-2320-302-13&P-1
DOOR BALLISTIC GLASS AND FRAME ASSEMBLY REPLACEMENT - CONTINUED
0015 00
0015 00-2
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
NOTE
Door ballistic glass and frame assembly weighs 151.8 lb (69 kg).
1.
With assistance, remove six nuts (9), washers (10), bolts (3), and washers (4) while maintaining support for internal bal-
listic glass door frame (11) with ballistic glass (12).
2.
With assistance, carefully remove internal ballistic glass door frame (11) with ballistic glass (12) from door (1).
3.
With assistance, remove lower two nuts (14), washers (15), ballistic window stop (13), bolts (7), washers (8), and lower
mirror support (2) while maintaining support for ballistic glass (16).
4.
With assistance, remove upper two nuts (14), washers (15), bolts (7), washers (8), and upper mirror support (6) while
maintaining support for ballistic glass (16).
5.
With assistance, remove two remaining nuts (14), washers (15), bolts (7), and washers (8) while maintaining support for
ballistic glass (16).
6.
With assistance, carefully remove ballistic glass (16) from outside of door (1).
Back to Top
