TB-9-2320-302-13-P-1
CREW PROTECTION KIT PART 1 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS
NOVEMBER 2006
TB-9-2320-302-13-P-1 - Page 79 of 380
TB 9-2320-302-13&P-1
0015 00-1
DOOR BALLISTIC GLASS AND FRAME ASSEMBLY REPLACEMENT
0015 00
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Unit
Tools and Special Tools
Tool Kit, General Mechanic’s (Item 8, WP 0033 00)
Materials/Parts
Rag, Wiping (Item 6, WP 0034 00)
References
WP 0011 00
Personnel Required
Two
Equipment Conditions
(M915A3P1, M916A3P1, and M917A2P1)
Vehicle parked on level ground (TM 9-2320-302-
10)
Parking/Emergency Brake applied (TM 9-2320-
302-10)
Engine off (TM 9-2320-302-10)
Battery Disconnect Switch in OFF position (TM 9-
2320-302-10)
Outside Door Mirror removed (TM 9-2320-302-20)
Equipment Conditions - Continued
(M915A4P1)
Vehicle parked on level ground (TM 9-2320-303-
10)
Parking/Emergency Brake applied (TM 9-2320-
303-10)
Engine off (TM 9-2320-303-10)
Battery Disconnect Switch in OFF position (TM 9-
2320-303-10)
Outside Door Mirror removed (TM 9-2320-303-24-
1)
(M915A2P1, M916A1P1, M916A2P1, and
M917A1P1)
Vehicle parked on level ground (TM 9-2320-363-
10)
Parking/Emergency Brake applied (TM 9-2320-
363-10)
Engine off (TM 9-2320-363-10)
If equipped, Battery Disconnect Switch in OFF
position (TM 9-2320-363-10), otherwise, discon-
nect battery cables (TM 9-2320-363-20-2)
Outside Door Mirror removed (TM 9-2320-363-20-
2)
NOTE
The following procedure is for right side door ballistic glass and frame. Use same procedure for left side
door ballistic glass and frame.
Back to Top
