TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 231 of 396

ArmorWorks

H

OOD

S

UPPORT

R

EMOVAL

2.) Remove the four 3/8” bolts securing

each of the two Hood Alignment

Receptacles to the underside of

the hood.

* These parts will not be re-installed later.

REQUIRED TOOLS:

1/2” Socket with Ratchet Driver

1/2" Wrench

9/16” Socket with Ratchet Driver

9/16” Wrench

1.) Remove the four 5/16” bolts securing each of the two Hood Support / Alignment Posts to the

firewall brackets.

* These parts will not be re-installed later.

TB 9-2320-302-13&P-2

0038 00-19