TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 228 of 396

ArmorWorks

4.)

If weather stripping appeared on the

inside of glass, push glass from

outside of the truck to the inside of

the truck

cab. If the weather

stripping appeared on the outside of

the cab push glass

from inside the cab to outside.

* Picture demonstrates stripping on inside and

window pushed from outside the truck to

inside cab.

F

ENDER AND

M

UD

F

LAP

R

EMOVAL

3.) Release seal in weather stripping by

using a flat headed screwdriver and

wedging it in the split.

*Note: seam that needs to be released

may appear inside or outside

of vehicle.

REQUIRED TOOLS:

9/16” Socket with Ratchet Driver

9/16” Wrench

Remove the fenders from the truck to facilitate installation

of the wheel well

blast deflectors

1.) Loosen and remove bolts on top of

fender and inside of fender.

2.) Remove front mud flaps by extracting bolts.

* Save the fenders and mounting hard ware for

later re-installation.

TB 9-2320-302-13&P-2

0038 00-16