TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 224 of 396

ArmorWorks

O

VERHEAD CONSOLE REMOVAL

REQUIRED TOOLS:

9/16” Socket with Ratchet Driver

13mm Socket

REQUIRED TOOLS:

T20 Torx Bit with Driver

1.) Remove sun visors.

2.) Remove console.

3.) Remove headliner.

4.) Remove dome lights/

*Cut tape on wires so the connector wires

can stretch to front of the cab for later

Installation.

1.) Remove the seat from the truck by

loosing bolts with a 9/16” Socket and

Ratchet Driver (removing seats helps

facilitate installation of the armor kit).

S

EAT

R

EMOVAL

TB 9-2320-302-13&P-2

0038 00-12