TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 232 of 396
ArmorWorks
B-P
ILLAR
B
RACKET
R
EMOVAL
2.) Drill out the rivet heads and remove the brackets.
REQUIRED TOOLS:
1/4” Drill Bit and Drill
Pin Punch or Center Punch
Hammer
Remove the padlock bracket from the b-pillar
on both sides of the cab.
1.) Use the punch and hammer to knock-out
the center pins on the two pop rivets
securing each bracket.
TB 9-2320-302-13&P-2
0038 00-20
Back to Top
