TB-9-2320-302-13-P-3
CREW PROTECTION KIT; AIR CONDITIONING KIT PART 3 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT, AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
MARCH 2008
TB-9-2320-302-13-P-3 - Page 134 of 240
TB 9-2320-302-13&P-3
RECEIVER/DRYER REPLACEMENT - CONTINUED
0019 00
0019 00-2
REMOVAL
NOTE
Tag wires and hoses to aid in installation.
1.
Remove A/C hose (1) from receiver/dryer unit (10). Discard O-ring.
2.
Remove A/C hose (4) from receiver/dryer unit (10). Discard O-ring.
3.
Disconnect chassis wiring harness connector (2) and chassis wiring harness connector (3) from high pressure switches
on receiver/dryer unit (10).
WARNING
Receiver/dryer unit will fall when clamps are loosened. Support receiver/dryer while loosening clamps. Fail-
ure to comply may cause injury to personnel.
4.
Remove locknut (8), washer (7), bolt (5), washer (6), bracket (9), and receiver/dryer unit (10) from vehicle. Discard
locknut.
5.
Loosen two clamps (11) and remove receiver/dryer unit (10) from bracket (9).
449-077
5,6,7,8
9
10
11
1
2
3
4
Back to Top
