TB-9-2320-302-13-P-3
CREW PROTECTION KIT; AIR CONDITIONING KIT PART 3 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT, AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
MARCH 2008
TB-9-2320-302-13-P-3 - Page 144 of 240
TB 9-2320-302-13&P-3
A/C HOSE REPLACEMENT - CONTINUED
0020 00
0020 00-8
REMOVAL - CONTINUED
24.
Remove A/C hose (19) connection from evaporator assembly (28). Discard O-rings.
25.
Remove A/C hose (20) connection from evaporator assembly (28). Discard O-rings.
26.
Remove A/C hose (19) and A/C hose (20) from vehicle.
CLEANING AND INSPECTION
Clean and inspect all parts IAW
General Maintenance Instructions
(WP 0014 00).
INSTALLATION
WARNING
•
Contact with refrigerant can cause frostbite. Keep hands and face away to prevent personal injury.
•
Protective face shield must always be worn when refrigerant lines are opened, even if the gauges indi-
cate the system is empty.
•
Always use caution if a fitting is removed. Slowly loosen the fitting. If the system is still under any
pressure, release it slowly in a well-ventilated area.
•
DO NOT smoke when servicing A/Cs or wherever refrigerant gas may be present.
•
Failure to follow these warnings may result in injury or death to personnel.
449-051
28
19
20
Back to Top
