TB-9-2320-302-13-P-3
CREW PROTECTION KIT; AIR CONDITIONING KIT PART 3 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT, AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
MARCH 2008
TB-9-2320-302-13-P-3 - Page 44 of 240
TB 9-2320-302-13&P-3
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
0009 00-2
Operation
1
During
Blower Unit
a. Start engine (TM 9-2320-363-10).
b.Turn A/C system ON, fan speed
switch to HIGH position, and the
thermostat to COLD (WP 0004 00).
c.Operate A/C system for five minutes
and check temperature of air coming
out of blower unit vents.
Temperature of air coming out of vents
is not cold and A/C is required for mis-
sion.
Table 1. Operator Preventive Maintenance Checks and Services (PMCS) - Continued.
Item
No.
Interval
Location
Procedure
Not Fully Mission
Capable If:
Item To
Check/
Service
449-054
THERMOSTAT
A/C ON/OFF
FAN SPEED SWITCH
Back to Top
