TB-9-2320-302-13-P-3
CREW PROTECTION KIT; AIR CONDITIONING KIT PART 3 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT, AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
MARCH 2008
TB-9-2320-302-13-P-3 - Page 48 of 240
TB 9-2320-302-13&P-3
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
0009 00-6
Engine Com-
partment
4
Weekly
Compressor
a. Hood opened (TM 9-2320-363-10).
b.Inspect compressor for damage and
loose or missing mounting hardware.
Compressor is damaged, or mounting
bolts are loose or missing and A/C is
required for mission.
c.Inspect compressor for leaks. Leaks
can be identified by oil residue on fit-
tings.
Leaks are evident and A/C is required
for mission.
d.Inspect A/C hoses and electrical har-
ness for damage and loose or missing
mounting hardware.
A/C hoses or electrical harness are dam-
aged or have loose or missing mounting
hardware and A/C is required for mis-
sion.
e.Inspect A/C hoses for leaks. Leaks
can be identified by oil residue on fit-
tings or along hose.
Leaks are evident and A/C is required
for mission.
f. Inspect compressor belt for damage
and correct tightness (120 lb for new
belts and 90 lb for used belts).
Compressor belt is damaged or loose
and A/C is required for mission.
Table 1. Operator Preventive Maintenance Checks and Services (PMCS) - Continued.
Item
No.
Interval
Location
Procedure
Not Fully Mission
Capable If:
Item To
Check/
Service
Back to Top
