TB-9-2320-335-13-P

TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS

MAY 2008

TB-9-2320-335-13-P - Page 392 of 680

24-9. RIGHT ENGINE MOUNT BRACKET REPLACEMENT

This task covers:

a. Removal

b.

Installation

INITIAL SETUP:

NOTE

Tag engine mounts for installation. The left and right engine

mounts are not interchangeable with each other.

1.

Remove two locknuts (10), washers (1), capscrews (2), and washers (1) from support bracket (8) and

engine mount bracket (5). discard locknuts (10).

2.

Remove capscrew (3) and vent tube clamp (4) from engine mount bracket (5).

3.

Remove three locknuts (9), washers (7), capscrews (6), washers (7), support bracket (8), and engine

mount bracket (5) from frame rail (11). Discard locknuts (9).

1.

Install support bracket (8) and engine mount bracket (5) on frame rail (11) with three washers (7),

capscrews (6), washers (7), and locknuts (9).

2.

Secure support bracket (8) on engine mount bracket (5) with two washers (1), capscrews (2),

washers (1), and locknuts (10). Tighten locknuts (10) and (9) to 90 lb-ft (122 N•m).

3.

Install vent tube clamp (4) on engine mount bracket (5) with capscrew (3).

b. Installation

a. Removal

TB 9-2320-335-13&P

24-8

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Maintenance and repair shop equipment:

automotive (Appendix B, Item 2)

Materials/Parts

Five locknuts (Serial numbers 299999 and

below) (Appendix A, Item 85)

Five locknuts (Serial numbers 300000 and

above) (Appendix A, Item 114.4)

Manual References

TM 9-2320-387-24P

Equipment Condition

Engine right mount and insulator removed

(para. 15-3).

Maintenance Level

Direct support