TB-9-2320-335-13-P

TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS

MAY 2008

TB-9-2320-335-13-P - Page 398 of 680

24-14. REAR-FRONT TIEDOWN BRACKET REPLACEMENT

This task covers:

a. Removal

b.

Installation

1.

Remove four locknuts (1), washers (2), capscrews (7), and washers (2) from tiedown bracket (3) and

frame rail (10). Discard locknuts (1).

2.

Remove two locknuts (8), washers (4), capscrews (5), washers (4), vent tube mounting bracket (6),

and tiedown bracket (3) from rear suspension front crossmember mounting bracket (9). Discard

locknuts (8).

1.

Install tiedown bracket (3) on frame rail (10) with four washers (2), capscrews (7), washers (2), and

locknuts (1). Tighten locknuts (1) to 260 lb-ft (353 N

•

m).

2.

Install tiedown bracket (3) and vent tube mounting bracket (6) on rear suspension front

crossmember mounting bracket (9) with two washers (4), capscrews (5), washers (4), and

locknuts (8). Tighten locknuts (8) to 90 lb-ft (122 N

•

m).

b. Installation

a. Removal

TB 9-2320-335-13&P

24-14

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Maintenance and repair shop equipment:

automotive (Appendix B, Item 2)

Materials/Parts

Four locknuts (Appendix A, Item 88)

Two locknuts (Appendix A, Item 85)

(Serial numbers 299999 and below)

Two locknuts (Appendix A, Item 114.4)

(Serial numbers 300000 and above)

Manual References

TM 9-2320-387-24P

Equipment Condition

Wheel removed (TM 9-2320-387-24-1).

Maintenance Level

Direct support