TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 402 of 680
24-18
TB 9-2320-335-13&P
24-15.2. REAR MOUNTING PLATE/BRAKE ADAPTER REPLACEMENT
(SERIAL NUMBERS 300000 AND ABOVE)
This task covers:
a. Removal
b.
Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Two locknuts (Appendix A, Item 114.4)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Rear differential removed (para. 21-4.2).
Maintenance Level
Direct support
Remove two locknuts (5), washers (4), capscrews (1), washers (2), and rear brake adapter mounting plate (6)
from rear crossmember (3). Discard locknuts (5).
Install
rear brake adapter mounting plate (6) on rear crossmember (3) with two washers (2),
capscrews (1), washers (4), and locknuts (5). Tighten locknuts (5) to 90 lb-ft (122 N
•
m).
b. Installation
a. Removal
Back to Top
