TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 409 of 680
TB 9-2320-335-13&P
24-25
24-17.1. FRONT SUSPENSION REAR CROSSMEMBER REPLACEMENT
(SERIAL NUMBERS 300000 AND ABOVE) (Cont’d)
6.
Tighten two capscrews (10) to 65-78 lb-ft (88-106 N
•
m).
7.
Tighten six capscrews (7) to 90 lb-ft (122 N
•
m).
8.
Tighten six capscrews (16) to 90 lb-ft (122 N
•
m).
9.
Install steering gear (18) on frame rail (2) with three washers (19), lockwashers (20), and
capscrews (21). Tighten capscrews (21) to 60 lb-ft (81 N
•
m).
FOLLOW-ON TASKS: • Install differential support brackets and side mounting brackets (para. 24-15.1).
• Install front differential (para. 21-4.1).
• Install lower control arms (TM 9-2320-387-24-1).
• Install right front caliper-to-tee brake line (para. 7-7.1).
• Install lower radiator tube (para. 3-71.1).
• Install right front upper control arm (TM 9-2320-387-24-1).
• Install geared drive and upper front rear crossmember (para. 3-80.2).
18
19
20
21
2
Back to Top
