TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 416 of 680
24-23. REAR BUMPER MOUNTING BRACKET AND TIEDOWN BRACKET REPLACEMENT
(SERIAL NUMBERS 300000 AND ABOVE)
This task covers:
a. Removal
b. Installation
1.
Remove four locknuts (9), washers (6), capscrews (5), and washers (6) from bumper mounting
bracket (7) and bumper (4). Discard locknuts (9).
2.
Remove four locknuts (8), washers (2), capscrews (3), washers (2), bumper mounting bracket (7), and
spacer (10) from frame rail (1). Discard locknuts (8).
1.
Install spacer (10) and bumper mounting bracket (7) on frame rail (1) with four washers (2),
capscrews (3),
washers (2), and locknuts (8).
2.
Install bumper mounting bracket (7) on bumper (4) with four washers (6), capscrews (5),
washers (6), and locknuts (9).
b. Installation
a. Removal
FOLLOW-ON TASKS: • Install tiedown ring (TM 9-2320-387-24-1).
• Install rear body mount (TM 9-2320-387-24-2).
TB 9-2320-335-13&P
24-32
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Four locknuts (Appendix A, Item 83)
Four locknuts (Appendix A, Item 114.4)
Manual References
TM 9-2320-387-24-1
TM 9-2320-387-24-2
TM 9-2320-387-24P
Equipment Condition
• Rear body mount removed (TM 9-2320-387-24-2).
• Tiedown ring removed (TM 9-2320-387-24-1).
Maintenance Level
Direct support
~
1
2
3
~
4
5
6
7
2
8
6
9
10
Back to Top
