TB-9-2320-335-13-P

TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS

MAY 2008

TB-9-2320-335-13-P - Page 412 of 680

1.

Install crossmember mount (17) on crossmember (6) with two washers (24), capscrew (23), washers (30),

and locknuts (31). Tighten locknuts (31) to 260 lb-ft (353 N

•

m).

2.

Secure crossmember mount (17) to crossmember (6) with washer (21), capscrews (22), washers (32),

and locknuts (33). Tighten locknuts (33) to 90 lb-ft (122 N

•

m).

3.

Slide crossmember mount (17) and crossmember (6) onto frame (14).

4.

Install reinforcement plates (10) and (11) and tiedown bracket (18) on frame (14) with four washers (12),

capscrews (13), washers (19), and locknuts (20).

5.

Install radius rod (27) on crossmember mount (17) with washer (28), capscrew (29), washer (26), and

locknut (25). Tighten locknuts (25) to 260 lb-ft (353 N

•

m).

6.

Secure tiedown bracket (18) to crossmember mount (17) with vent line bracket (9), two washers (7),

capscrews (8), washers (15), and locknuts (16).

7.

Install vent line (5) on crossmember (6) with two clamps (4) and (2) and capscrews (3) and (1).

b. Installation

24-28

TB 9-2320-335-13&P

24-18.1. REAR SUSPENSION FRONT CROSSMEMBER REPLACEMENT

(SERIAL NUMBERS 300000 AND ABOVE) (Cont’d)