5-34
TB 9-2320-387-35-1
13-4.
Remove twelve screws (9), four screws (11), and cargo floor cover (10) from cargo floor (12). Retain
all screws (9) and (11).
13-5.
Cut notch in cargo floor cover (10) as shown.
13-6.
Cut and install grommet material (13) to fit. Secure with RTV compound.
13-7.
Remove three screws (15), washers (18), nuts (17), and rear partition access cover (16) from rear
partition (14).
Figure 5-45.
Figure 5-44.
12
~
~
9
10
11
13. GROMMET MATERIAL – MS21266-1N – QTY. A/R
~
14
15
10
13
16
17
18
.875
1.00