TB-9-2510-251-13

TECHNICAL BULLETIN

OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING

AUGUST 2007

TB-9-2510-251-13 - Page 122 of 624

2-106

TB 9-2510-251-13

AIR INTAKE DUCT

(2)

Mark air intake duct at the air filter housing.

Remove air intake duct.

1

2-1.4

Installation of Air Conditioning Kit to M1025A2 with GSIE Add-on-Armor (Cont’d).

a. Install Compressor

CAUTION

When tightening bolts, DO NOT overtighten.

Torque to specified torque value only.

Failure to comply could result in damage to equipment.

NOTE

The Compressor Kit is designed to be installed with both versions of the liten

serpentine belt drive systems.

Compressor Mounting Model RD-9-10012-0:

Figure 2-157.

Breaker Bar

Figure 2-158.

Air Intake Duct Removal

(1)

Using a 3/8 ratchet or breaker bar, rotate belt tensioner (1).

Slip belt off passenger side

grooved idler pulley.

Remove belt.