TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 265 of 704
0025-3
TB 9-3950-253-13&P
0025
INSTALLATION – CONTINUED
NOTE
•
Install sensor arm on sensor linkage as noted during removal.
•
Leave locknuts on sensor arm loose enough to allow movement of arm.
3. Install sensor arm (
Figure 1,
Item 6), washer (
Figure 1,
Item 4), and new locknut (
Figure 1,
Item 5) on stowage
guide (
Figure 1,
Item 22).
4. Install bolt (
Figure 1,
Item 15), washer (
Figure 1,
Item 14), sensor arm (
Figure 1,
Item 6), washer (
Figure 1,
Item 7), and new locknut (
Figure 1,
Item 8) on sensor linkage (
Figure 1,
Item 13).
5. Install sensor cover (
Figure 1,
Item 3), three washers (
Figure 1,
Item 2), bolts (
Figure 1,
Item 1), washers
(
Figure 1,
Item 20), and new locknuts (
Figure 1,
Item 19) on stowage assembly (
Figure 1,
Item 21).
Figure 1.
Angle Sensor.
0025
END OF TASK
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Back to Top
