TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 325 of 704
0031-3/(4 Blank)
0031
TB 9-3950-253-13&P
INSTALLATION
00031
WARNING
•
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety gog-
gles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances.
•
Component will fall when attaching hardware is removed. Support component while
installing attaching hardware.
•
Failure to follow these warnings may result in injury to personnel.
1. Apply thread adhesive to four mounting pins (Figure 1, Item 2).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Failure to follow this warning may result in injury or death to
personnel.
NOTE
Bail bar weighs 61 lb (28 kg).
2. With assistance, install bail bar (Figure 1, Item 3), four mounting pins (Figure 1, Item 2), and new locknuts
(Figure 1, Item 4) on lift frame (Figure 1, Item 1). Tighten locknuts to 147 lb-ft (200 Nm).
END OF TASK
FOLLOW-ON TASKS
00031
Stow lift frame on vehicle WP 0007,
Unloading and Loading Empty Lift Frame
.
END OF TASK
END OF WORK PACKAGE
Back to Top
