TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 342 of 704

TB 9-3950-253-13&P

0034-6

0034

LIFT FRAME SENSOR INSTALLATION – CONTINUED

4. Load and stow lift frame (WP 0007).

5. Loosen two bolts (Figure 7, Item 4) in cable clamp (Figure 7, Item 5).

6. Adjust lift frame sensor (Figure 7, Item 3) placement until face of sensor is 0.0625 to 0.1875 in.

(2 to 3 mm) from collar (Figure 7, Item 2) on roller pin (Figure 7, Item 1) and tighten two bolts (Figure 7, Item 4).

Figure 7.

Lift Frame Sensor Calibration.

0034

END OF TASK

1

2

4 (HIDDEN)

5

3