TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 362 of 704

TB 9-3950-253-13&P

0035-14

0035

INSTALLATION – CONTINUED

Slider Assembly Installation – Continued

00035

3. Use lifting device to place rear slider assembly (Figure 14, Item 1) on mounting blocks (Figure 14, Item 4),

aligning holes in rear slider assembly with front holes in mounting block.

NOTE

Perform steps 4 through 6 for both right and left sides.

4. Apply thread adhesive to four bolts.

5. Install four washers (Figure 14, Item 2) and bolts (Figure 14, Item 3) in rear slider assembly (Figure 14, Item 1).

6. Remove lifting device and sling from rear slider assembly.

Figure 14.

Rear Slider Assembly.

035

467-112

1

2,3

4

2,3