TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 367 of 704
0035-19
TB 9-3950-253-13&P
0035
INSTALLATION – CONTINUED
Lights and Light Bar Installation - Continued
00035
9. Install mounting plate (Figure 19, Item 5), and two screws (Figure 19, Item 6) on slider beam (Figure 19,
Item 1).
10. Install gasket (Figure 19, Item 9), light (Figure 19, Item 8), two ground wires (Figure 19, Item 3), and screws
(Figure 19, Item 2) on slider beam (Figure 19, Item 1).
11. Connect light connector (Figure 19, Item 4) to vehicle wiring harness (Figure 19, Item 7).
Figure 19.
Slider Beam Light and Mounting Plate Installation.
035
12. Install light cover (Figure 20, Item 1) and two screws (Figure 20, Item 2) on light (Figure 20, Item 3).
Figure 20.
Slider Beam Light Cover Installation.
035
2
5
2
3
4
9
87
6
1
1
3
1
2
3 (HIDDEN)
Back to Top
