TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 368 of 704
TB 9-3950-253-13&P
0035-20
0035
INSTALLATION – CONTINUED
Bumper Stop Installation
00035
With assistance, install bumper stop bracket (Figure 21, Item 1), six bolts (Figure 21, Item 2), and nuts (Figure 21,
Item 3) on frame (Figure 21, Item 4).
Figure 21.
Bumper Stop Installation.
035
PLS Only - Hard Lift Installation
00035
WARNING
•
Lifting cables, chains, hooks, and slings used for lifting must be in good condition and of
suitable capacity.
•
Improper use of lifting equipment and improper attachment of cables may cause injury to
personnel and damage to equipment. Observe all standard rules of safety.
•
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device.
•
Failure to follow these warnings may result in injury or death to personnel.
NOTE
Hard lift assembly weighs 240 lb (109 kg).
1
2,3
4
Back to Top
