TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 584 of 704
TB 9-3950-253-13&P
0053-4
0053
EXPLANATION OF COLUMNS IN THE REPAIR PARTS LISTS – CONTINUED
c.
Recoverability Code.
Recoverability codes are assigned to items to indicate the disposition action on
unserviceable items. The recoverability code is entered in the fifth position of the SMR code as follows:
Code
Application/Explanation
Z . . . . . . . . . . . . . . .Nonrepairable item. When unserviceable, condemn and dispose of the
item at the level of maintenance shown in the third position of the SMR
code.
O. . . . . . . . . . . . . . .Reparable item. When uneconomically reparable, condemn and dispose
of the item at the Unit level maintenance.
F . . . . . . . . . . . . . . .Reparable item. When uneconomically reparable, condemn and dispose
of the item at Direct Support level.
H. . . . . . . . . . . . . . .Reparable item. When uneconomically reparable, condemn and dispose
of the item at General Support level.
D. . . . . . . . . . . . . . .Reparable item. When beyond lower level repair capability, return to
depot. Condemnation and disposal of item are not authorized below
depot level.
L . . . . . . . . . . . . . . .Reparable item. Condemnation and disposal of item not authorized below
Specialized Repair Activity (SRA).
A. . . . . . . . . . . . . . .Item requires special handling or condemnation procedures because of
specific reasons (e.g., precious metal content, high dollar value, critical
material, or hazardous material). Refer to appropriate manuals/directives
for specific instructions.
3.
NSN - (Column 3).
The NSN for the item is listed in this column.
4.
CAGEC (Column 4).
The Commercial and Government Entity Code (CAGEC) is a five-digit code which is
used to identify the manufacturer, distributor, or Government agency/activity that supplies the item.
5.
PART NUMBER (Column 5).
Indicates the primary number used by the manufacturer (individual, company,
firm, corporation, or Government activity), which controls the design and characteristics of the item by means
of its engineering drawings, specifications, standards, and inspection requirements to identify an item or range
of items.
NOTE
When you use an NSN to requisition an item, the item you receive may have a different
part number from the part ordered.
6.
DESCRIPTION AND USABLE ON CODE (UOC) (Column 6).
This column includes the following information:
a. The Federal item name and, when required, a minimum description to identify the item.
b. P/Ns of bulk materials are referenced in this column in the line entry to be manufactured or fabricated.
c.
Hardness Critical Item (HCI). A support item that provides the equipment with special protection from elec-
tromagnetic pulse (EMP) damage during a nuclear attack.
d. The statement END OF FIGURE appears just below the last item description in column (6) for a given fig-
ure in both the repair parts list and special tools list work packages.
7.
QTY (Column 7).
The QTY (quantity per figure) column indicates the quantity of the item used in the breakout
shown on the illustration/figure, which is prepared for a functional group, subfunctional group, group or an
assembly. A “V” appearing in this column in lieu of a quantity indicates that the quantity is variable and the
quantity may vary from application to application.
Back to Top
