TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 578 of 704
TB 9-3950-253-13&P
Change 1
0052-68
0052
LIGHT BAR ASSEMBLY INSTALLATION – CONTINUED
Hard Lift Installation - PLS Only
00052
WARNING
•
Lifting cables, chains, hooks, and slings used for lifting must be in good condition and of
suitable capacity.
•
Improper use of lifting equipment and improper attachment of cables may cause injury to
personnel and damage to equipment. Observe all standard rules of safety.
•
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device.
•
Failure to follow these warnings may result in injury or death to personnel.
NOTE
Hard lift assembly weighs 240 lb (109 kg).
1. Attach sling and lifting device to hard lift (Figure 72,
Item
1).
2. Use lifting device to install hard lift (
Figure 72,
Item
1
) on vehicle.
3. Install six bolts (
Figure 72,
Item
3
), and nuts (
Figure 72,
Item
2
) on hard lift (
Figure 72,
Item
1
).
Figure 72.
PLS Hard Lift Installation.
052
END OF TASK
END OF WORK PACKAGE
1
2,3
Back to Top
