TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 569 of 704
0052-59
Change 1
TB 9-3950-253-13&P
0052
LIGHT BAR ASSEMBLY INSTALLATION – CONTINUED
NOTE
•
On trucks with standard lights, perform steps 13 and 14 for lights on right and left slider
beds.
•
On trucks with LED lights, perform steps 15 and 16 for lights on right and left slider beds.
13. At rear slider bed (Figure 61, Item 1), feed extension wire (Figure 61, Item 2) through hole in side of slider bed.
14. Install light (Figure 61, Item 3), two ground wires (Figure 61, Item 5), and screws (Figure 61, Item 4) on slider
bed (Figure 61, Item 1).
Figure 61.
Slider Light Installation.
052
1
2
3
4
5
5
4
Back to Top
