TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 567 of 704

0052-57

Change 1

TB 9-3950-253-13&P

0052

LIGHT BAR ASSEMBLY INSTALLATION – CONTINUED

NOTE

Ground wire is on PLS only.

4. At inside light location of bracket (Figure 58, Item 1), feed light wire (Figure 58, Item 5) through bracket and

connect to original wiring harness connector (Figure 58, Item 4).

5. Install light (Figure 58, Item 7), two screws (Figure 58, Item 2), ground wire (Figure 58, Item 3) and two nuts

(Figure 58, Item 6) on bracket (Figure 58, Item 1).

Figure 58.

Inside Light Installation.

052

6. At outside light location of bracket (Figure 59, Item 1), feed light wire (Figure 59, Item 6) through bracket and

connect to original wiring harness connector (Figure 59, Item 5).

7. Feed ground wire (Figure 59, Item 4) from harness (Figure 59, Item 7) through back of bracket (Figure 59,

Item 1) and back of light (Figure 59, Item 10), out through access hole (Figure 59, Item 9).

8. Install light (Figure 59, Item 10), two screws (Figure 59, Item 2), ground wires (Figure 59, Items 3 and 4), and

nuts (Figure 59, Item 8) on light bracket (Figure 59, Item 1).

9. Paint exposed metal surfaces.

Figure 59.

Outside Light Installation.

052

1

2

3

2

4

5

5

6

6

7

1

2

3

4

2

10

9 (HIDDEN)

8

1

8

7

6

5

4