TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 90 of 704
TB 9-3950-253-13&P
Change 1
0008-12
0008
LOAD CONTAINER – CONTINUED
WARNING
•
NO TRANS light on indicates lifting mechanism is not in home position. Refer to
Unload
Container
in this work package. Then repeat
Load Container
.
•
If NO TRANS light is still on, exit cab and visually check that lifting mechanism is in home
position, then set MODE switch at MAN TRANS. DO NOT attempt to move or drive
vehicle if not in home position.
•
Failure to follow these warnings may result in injury or death to personnel and damage to
equipment.
8. Check to see NO TRANS light (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P) is off.
9. With engine at idling speed, set MODE switch (Figure 15, Item 1) to OFF (PLS: TM 9-2320-364-14&P, HEMTT:
TM 9-2320-326-14&P).
Figure 15.
MODE Switch at OFF.
08
10. Exit vehicle cab.
Checks
0008
1. Check that both rear corners of container are positioned within guides on slider beds
2. If container is not correctly positioned, follow instructions in
Unload Container
in this work package. Then
repeat
Load Container
.
END OF TASK
SECURE CONTAINER FOR TRANSPORT
0008
Secure Twistlocks
0008
1. Verify these conditions are met:
a. Hook arm is in home position (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
b. Lift frame is supported by hook and attached to container (
Load Container
).
c.
Slider bed assemblies are in container configuration (
Convert Slider Beds to Container Configuration
) (WP 0006).
d. MODE toggle switch is set to OFF position (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
e. Stowage toggle switch is set to OFF position (WP 0004).
f.
NO TRANS light is OFF (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P.
g. Parking brake is set (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
467-052
1
Back to Top
