TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 85 of 704
0008-7
Change 1
TB 9-3950-253-13&P
0008
ATTACH LIFT FRAME TO CONTAINER – CONTINUED
Lock Slide Housings
0008
NOTE
Perform steps 1 through 3 for both right and left sides.
1. Remove locking pin (Figure 7, Item 4) from slide housing (Figure 7, Item 1).
2. Push locking handle (Figure 7, Item 3) toward container (Figure 7, Item 2) to secure slide lock in upper corner
casting.
3. Install locking pin (Figure 7, Item 4) in slide housing (Figure 7, Item 1).
Figure 7.
Lock Both Slide Housing Locking Handles.
08
Checks
0008
1. Verify both upper guides are fully lowered into apertures on top of container.
2. Verify both slide housing locking handles are locked.
3. Verify both lower locking pins are inserted in corner castings of container.
4. Verify anti-loose fastener on each lower guide is locked.
5. Verify bail bar lock is installed on hook.
END OF TASK
467-183
2
1
1
2
4
3
3
4
Back to Top
