TM-10-5411-205-13
SHELTER, ELECTRICAL EQUIPMENT - 250/G
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL
MAY 1995
CHANGE 2
TM-10-5411-205-13 - Page 4 of 127
TM 10-5411-205-13
WARNING
Drilling creates metal chips which may enter eyes and cause seri-
ous injury. Eye protection is required.
WARNING
Adhesives and solvents are flammable and toxic. Keep away from
heat and open flames.
Use in a well-ventilated area. Avoid skin
and eye contact and breathing of vapors. Use protective goggles
and gloves. Use in accordance with manufacturer’s instructions.
For Artificial Respiration, refer to FM21-11.
WARNING
Gloves are to be worn when mixing and applying adhesive material
due to possible skin irritation caused by adhesive coming into con-
tact with the body skin surface.
The Versamid material is extreme-
ly sensitive to moisture absorption. Therefore, make sure Versamid
140 container has lid firmly replaced after material has been re-
moved from shipping or storage container.
WARNING
All personnel must remain clear of truck while shelter is being low-
ered into place.
a/(b blank)
Back to Top
