TM-10-5411-205-13
SHELTER, ELECTRICAL EQUIPMENT - 250/G
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL
MAY 1995
CHANGE 2
TM-10-5411-205-13 - Page 42 of 127
TM 10-5411-205-13
3-12.
Trough
This task covers
Replace
INITIAL SETUP
T
OO
l
S
Materials/Parts
General Mechanic’s Automotive Tool Kit
Sealer (Item 28, Appendix D)
Replace.
(1)
(2)
(3)
(4)
(5)
(Figure 3-13)
NOTE
The trough mounted to the shelter rear panel just above the door
is identical to the trough on the outer door except that the rear
panel trough is longer and is mounted with six screws instead of
five .
Remove five tapping screws (1) mounting trough (2) to outer door (3).
Take trough (2) off door (3).
Apply sealer to back of trough (2).
Position trough (2) on top edge of outer door (3).
Dip in sealer and install five tapping screws (1), and coat heads of screws with
sealer.
Figure 3-13. Trough Replacement.
3-25
Back to Top
