TM-10-5411-205-13
SHELTER, ELECTRICAL EQUIPMENT - 250/G
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL
MAY 1995
CHANGE 2
TM-10-5411-205-13 - Page 81 of 127
TM 10-5411-205-13
3-33.
Skid Assembly (cont).
Figure 3-35. Skid Assembly Replacement.
c .
Disassemble.
(Figure 3-36)
(1) Pull skirt (1) out of mounting grooves of upper plate assembly (2) and nose
plate assembly (3).
(2) Drill out four rivets (4) and two rivets (5) attaching spring (6) to skid plate (7),
and remove spring (6) and spacer (8).
(3) Drill out 16 rivets (9) attaching each noseplate (10 and 11) to plate (12) and
shoe (13).
(4) Drill out two rivets (14) attaching each plate (12) to shoe (13) and remove plates
(12) from shoe (13).
d .
Repair.
Repair of the skid assembly consists of replacement of the damaged skirts,
spring, or noseplate assembly.
e .
Assemble.
(Figure 3-36)
(1) Position each plate (12) in place on shoe (13) and secure with two rivets (14).
(Refer to paragraph 3-9.a for rivet installation instructions.)
3-64
Back to Top
