TM-3-1040-268-20-P
LAUNCHER, GRENADE, SMOKE: SCREENING, RP, M250
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MAY 1982
TM-3-1040-268-20-P - Page 25 of 72
TM 3-1040-268-20&P
LOCATION
ITEM
ACTION
REMARKS
a. Jack Connectors - Maintenance Instructions.
REMOVAL
CAUTION
To avoid damage to discharger, do not put strain on wires.
Body
This procedure is used
a.
b.
c.
Cover plate (1)
Ground wire B
Jack connector
NOTE
to replace any of six jack connectors.
a.
b.
c.
d.
Remove six bolts (2) and
Remove cover plate from body (4).
Rotate 360° to unwind wires.
Prop against body.
six Iockwashers (3).
Remove ground screw (5) and
disconnect terminal.
(6)
a.
b.
c.
d.
Remove six self-locking nuts (7)
and disconnect resistor wires 1
through 6.
Using socket wrench handle with
extension and socket, hold
adapter (8).
Turn large nut (9) with wrench.
Remove nut and lockwasher (10).
Remove faulty jack connector (6)
including bonded seal (11).
2-13
Back to Top
