TM-3-1040-268-20-P
LAUNCHER, GRENADE, SMOKE: SCREENING, RP, M250
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MAY 1982
TM-3-1040-268-20-P - Page 28 of 72
TM 3-1040-266-20&P
2-8. DISCHARGER - MAINTENANCE INSTRUCTIONS (CONT).
LOCATION
ITEM
ACTION
REMARKS
b. Resistors - Maintenance instructions.
CAUTION
To avoid damage to discharger, do not put strain on wires.
NOTE
This procedure is used to replace either of two resistors.
a. Cover plate (1)
a. Remove six bolts (2) and six Iockwashers (3).
b. Remove cover plate from body (4).
c. Rotate 360° to unwind wires.
d. Prop against body.
b. Jack connector (5)
c. Ground wire B
Remove six self-locking nuts (6)
and disconnect resistor wires 1
through 6.
Remove ground screw (7) and dis-
connect terminal.
2-16
Back to Top
