2 Electrical Receptacle
Gasket (3)
Connector
Check material, if brittle or torn, replace,
INSTALLATION
1 Cover Plate
a. Electrical receptacle
connector (1)
a. Insert four screws (2) in electrical
receptacle connector (1).
b. Place gasket (3) on electrical recepta-
cle connector (1).
c. Aline key with location mark on outside
of cover plate (4).
d. Install on cover plate (4) with four
packings with retainers (5) and four
self-locking nuts (6). Tighten.
TM 3-1040-268-20&P
2-25