TM-3-1040-268-20-P
LAUNCHER, GRENADE, SMOKE: SCREENING, RP, M250
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MAY 1982
TM-3-1040-268-20-P - Page 39 of 72
TM 3-1040-268-20&P
To avoid damage to
b. Resistors
c. Ground wire B
discharger, do not
Connect resistor wire terminals 1
through 6 to end of six jack connectors
(7) and install six self-locking nuts (8).
Tighten.
Connect terminal to base with screw
(9). Tighten.
CAUTION
pinch wires between cover plate and discharger
2 Body
a. Cover plate (4)
a. Rotate 360° to wind wires,
b. Install on body (10) with six bolts (11)
and six Iockwashers (12).
b. Bolts (11)
Torque to 48 to 72 inch-pounds.
base.
2-27
Back to Top
