TM-3-1040-268-20-P
LAUNCHER, GRENADE, SMOKE: SCREENING, RP, M250
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MAY 1982
TM-3-1040-268-20-P - Page 31 of 72
INSTALLATION
1 Cover Plate
a. Resistor (1)
Mount on cover plate (2) by instal-
ling two clamps (3) with preformed
packing (4), two screws (5), two
washers (6), and two self-locking
nuts (7). Tighten.
TM 2-1040-268-20&P
CAUTION
Do not break strands on wire when stripping insulation.
b. Electrical receptacle
a. Strip wire insulation on single resistor wire to
connector (8)
depth of solder well.
b. Cut a piece of insulation sleeving 3/4-inch long.
c. Slide new insulation sleeving on wire A or C.
2-19
Back to Top
