TM-3-1040-268-20-P
LAUNCHER, GRENADE, SMOKE: SCREENING, RP, M250
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MAY 1982
TM-3-1040-268-20-P - Page 33 of 72
CAUTION
To avoid damage to discharger, do not pinch wires between cover plate and body.
2 Body
a. Cover plate (2)
a. Rotate 360° to wind wires.
b. Install on discharger base (12) with six bolts (13)
and six lockwashers (14).
Torque to 48 to 72 inch-pounds.
b. Bolts (13)
Discharger
Electrical circuits
Troubleshoot, using multimeter do steps 4 and 5
under malfunction 1 in table 2-1 (para 2-6).
TM 3-1040-268-20&P
NOTE
Do not paint electrical receptacle connector, jack connectors, nameplate, or screws. Do not let paint clog
mounting holes or drain holes.
Discharger
All outside surfaces
a. Remove burrs, corrosion, and chipped paint.
b. Touch up with primer coating (item 4, app D)
and enamel (item 3, app D).
See TM 43-0139.
2-21
Back to Top
