TM-3-1040-268-20-P
LAUNCHER, GRENADE, SMOKE: SCREENING, RP, M250
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MAY 1982
TM-3-1040-268-20-P - Page 43 of 72
2-31
TM 3-1040-268-20&P
2 Body
f.
g.
h.
Slide one piece of insulation sleeving over ter-
minal sleeve and heatshrink.
Slide the other piece of insulation sleeving over
pin soldered connection and heatshrink.
Using remover, insert pin B into electrical
receptacle connector (1).
b. Cover plate (4)
a. Rotate 360° to wind wires.
c. Bolts (6)
b. Install on body (5) with six bolts (6) and si
Iockwashers (7).
Torque to 48 to 72 inch-pounds.
Back to Top
