TM-3-1040-268-20-P
LAUNCHER, GRENADE, SMOKE: SCREENING, RP, M250
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MAY 1982
TM-3-1040-268-20-P - Page 48 of 72
APPENDIX C
TM 3-1040-268-20&P
ORGANIZATIONAL MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIS T
Current as of 14 December 1981
Section I. INTRODUCTION
C-1. SCOPE.
This appendix lists spares and repair parts required for perfor-
mance of organizational maintenance of the grenade launcher. It authorizes the
requisitioning and issue of spares and repair parts as indicated by the source
and maintenance codes.
C-2. GENERAL.
This Repair Parts and Special Tools List is divided into the
following sections:
a.
Section II.
Repair
Parts List.
A list of spares and repair parts authorized
for use in the performance of maintenance. The list also includes parts which
must be removed for replacement, in numerical sequence, with the parts in each
group listed in figure and item number sequence. Bulk materials are listed in
National Stock Number (NSN) sequence.
b.
Section Ill. Special Tools List.
Not applicable.
c.
Section IV. National Stock Number and Part Number Index.
A list in
National Item Identification Number (NIIN) sequence, of all NSNS appearing in
the listings, followed by a list in alphameric sequence of all part numbers
appearing in the listings. NSNS and part numbers are cross-referenced to each
illustration figure and item number appearance. This index is followed by a
cross-reference list of reference designators to figure and item numbers.
C-3. EXPLANATION OF COLUMNS.
a.
Illustration.
This column is divided as follows:
(1)
Figure number.
Indicates the figure number of the illustration on
which the item is shown.
(2)
Item number.
The number used to identify item called out in illustra-
tion.
b.
Source, Maintenance, and Recoverability (SMR) Codes.
(1)
Source code.
Source codes indicate the manner of acquiring sup-
porl items for maintenance, repair, or overhaul of end items. Source codes are
entered in the first and second positions of the Uniform SMR Code format as
follows:
Code
PA
PB
PC
PD
PE
PF
PG
KD
KF
KB
MO
MF
Definition
Item procured and stocked for anticipated or known usage.
Item procured and stocked for insurance purposes because essential-
ity dictates that a minimum quantity be available in the supply system.
Item procured and stocked and which otherwise would be coded PA
except that it is deteriorative in nature.
Support item, excluding support equipment, procured for initial issue or
outfitting and stocked only for subsequent or additional initial issues or
outfittings. Not subject to automatic replenishment.
Support equipment procured and stocked for initial issue or outfitting to
specified maintenance repair activities.
Support equipment which will not be stocked but which will be centrally
procured on demand.
Item procured and stocked to provide for sustained support for the life of
the equipment. It is applied to an item peculiar to the equipment which,
because of probable discontinuance or shutdown of production
facilities, would prove uneconomical to reproduce at a later time.
An item of a depot overhaul/repair kit and not purchased separately.
Depot kit defined as a kit that provides items required at the time of
overhaul or repair.
An item of a maintenance kit and not purchased separately. Mainte-
nance kit defined as a kit that provides an item that can be replaced at
organizational or intermediate levels of maintenance.
Item included in both a depot overhaul/repair kit and a maintenance kit.
Item to be manufactured or fabricated at organizational level.
Item to be manufactured or fabricated at the direct support mainte-
nance level.
C-0
Back to Top
