TM-5-2330-325-13-P

SEMITRAILER, MEDIUM HEAVY EQUIPMENT TRANSPORTER (MHET), 40 TON, M870A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-2330-325-13-P - Page 267 of 648

FIELD MAINTENANCE

BRAKE CAMSHAFT MAINTENANCE

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanic's

(WP 0144, Table 1, Item 16)

Gloves, Chemical and Oil Protective

(WP 0144, Table 1, Item 7)

Materials/Parts

Brush, Scrub (WP 0143, Table 1, Item 5)

Rag, Wiping (WP 0143, Table 1, Item 21)

Seal Qty: (2) (WP 0103, Figure 6, Item 3)

Screw, Self-Tapping

Materials/Parts (cont.)

Qty: (4) (WP 0106, Figure 9, Item 5)

Solvent, Cleaning Compound

(WP 0143, Table 1, Item 24)

References

WP 0093

Equipment Condition

Brake shoe assembly removed (WP 0057)

Slack adjuster assembly removed (WP 0059)

WARNING

Wear eye protection when removing and installing retaining rings to prevent them from

flying off and hitting your face. Failure to comply may result in death or injury to personnel.

Seek medical attention in the event of an injury.

CAUTION

Make sure not to damage machined surface of camshaft when removing retaining ring.

Failure to comply may result in damage to, or destruction of, equipment or mission.

NOTE

There are six camshafts on semitrailer, this procedure replaces one camshaft. All other

camshafts are replaced the same.

TM 5-2330-325-13&P

0058

0058-1